Analisis Kerusakan dan Perbaikan Disc Brake Menggunakan Metode Sound Detector
DOI:
https://doi.org/10.56904/imejour.v4i1.158Keywords:
Kampas rem, Kekasaran permukaan, Sound detector, Kebisingan remAbstract
Sistem rem merupakan komponen vital kendaraan yang kinerjanya dipengaruhi oleh kondisi permukaan cakram dan kampas rem. Penelitian ini menganalisis pengaruh kekasaran permukaan disc brake terhadap tingkat kebisingan pada variasi kecepatan putar serta hubungannya dengan jarak kerja kampas rem menggunakan alat Sound Detector Recordable (SDR III). Pengujian dilakukan pada tiga kondisi disc brake (standar, layak pakai, dan aus) dengan kecepatan 1000, 2000, dan 3000 rpm. Hasil analisis menunjukkan bahwa peningkatan kekasaran permukaan disc brake menyebabkan kenaikan intensitas kebisingan, terutama pada kecepatan tinggi, akibat gesekan tidak seragam yang memicu getaran. Penelitian ini memberikan kontribusi dalam menentukan standar kekasaran optimal guna meningkatkan performa, keamanan, dan kenyamanan sistem pengereman kendaraan.
References
[1] S. Gurumoorthy, N. Bhimchand, A. Bourgeau, & Y. Bhumireddy, “Effect of Surface Roughness on Tribological and NVH Behaviour of Brake System,” SAE Technical Paper, 2024
[2] S. Y. Zhang, Y. Y. Li, S. G., Qu, & W. P. Chen, “Friction and wear behaviour of brake pads dry sliding against semi-interpenetrating network ceramics/al-alloy composites,” Tribology Letters, 2010, 38(2), 135-146.
[3] H. Zhou, Z. Wang, Q. Wang, J. Mo, C. Zhao, & K. Wang, “ Dynamic models and analysis of key factors influencing stick–slip vibration in disc brake system,” Railway Engineering Science, 2025, 1-15.
[4] A. M. Rabia, N. M. Ghazaly, M. M. Salem, & A. M. Abd-El-Tawwab,”Experimental studies of automotive disc brake noise and vibration: a review, “ International Journal of Modern Engineering Research (IJMER), 2013, 3(1), 199-203.
[5] X. Su, J. Wang, & C. Lv, “Simulation and testing of modal characteristics of automotive disc brake,” Vibroengineering Procedia, 2025, 58, 66-72.
[6] A. Stephens, “Aerodynamic cooling of automotive disc brakes, “ (Doctoral dissertation, RMIT University), 2024.
[7] Y. Ogawa and K. Takagi, “An assessment of the effect of hull girder vibration on the statistical characteristics of wave loads,” Int. J. Nav. Archit. Ocean Eng., vol. 3, no. 1, pp. 80–85, 2011, doi: 10.2478/ijnaoe-2013-0048.
[8] H. Sangian, D. A. Rahman, R. Rudiwanto, S. Subekti, and A. Hamid, “Analisis Getaran pada Screw Compressor Akibat Pengaruh Putaran Rotor,” J. Rekayasa Mesin, vol. 11, no. 2, pp. 267–275, 2020, doi: 10.21776/ub.jrm.2020.011.02.13.
[9] M. A. Pratiwi, M. Ikhsan, R. D. Octavianto, A. Hamid, and S. Subekti, “DYNAMIC CHARACTERIZATION OF BALL BEARING IN TURBINE PROPELLER USING BUMP TEST METHOD,” SINERGI, vol. 25, no. 2, 2021, doi: 10.22441/sinergi.2021.2.004.
[10] M. F. Gulang, Z. D. Haq, H. Alpiyanto, and S. Subekti, “Karakteristik dinamik needle bearing pada camshaft dohc suzuki satria fu150 yang telah di modifikasi, dengan metode bump test,” Tek. J. Sains dan Teknol., vol. 16, no. 2, 2020, doi: 10.36055/tjst.v16i2.8461.
[11] M. Ikhsan, M. A. Pratiwi, R. D. Octavianto, A. Hamid, and S. Subekti, “Analisis Getaran Tapered Roller Bearing Pada Turbine Propeller Sebelum Dan Sesudah Pelumasan (Oli&Grease) Dengan Metode Bump Test,” Barometer, vol. 5, no. 2, pp. 277–281, 2020.
[12] A. F. Wicaksono, S. Subekti, and K. Indriyanto, “Analisis Pengaruh Penyumbatan Aliran Fluida Pada Pipa Dengan Metode Fast Fourier Transform,” J. Din. Vokasional Tek. Mesin, vol. 6, no. 1, pp. 77–83, 2021.
[13] K. S. Berahmana, “ANALISIS GETARAN PADA ALIRAN PIPA AKIBAT PEMASANGAN TURBINE PROPELLER,” AME (Aplikasi Mek. dan Energi) J. Ilm. Tek. Mesin, vol. 7, no. 1, 2021, doi: 10.32832/ame.v7i1.3667
[14] M. Saidiman, M. Satya Nugroho, Subekti, and A. Hamid, “KARAKTERISTIK DINAMIK COMPUTER NUMERICAL CONTROL MILLING ROUTER 4 AXIS,” Sist. J. Ilm. Nas. Bid. Ilmu Tek., vol. 9, no. 2, 2021, doi: 10.53580/sistemik.v9i02.62.
[15] S. Chomphan, “Vibration signal analysis of a motorcycle,” Int. J. GEOMATE, vol. 16, no. 56, 2019, doi: 10.21660/2019.56.4549.
[16] S. Subekti,”Studying The Dynamic Characteristics To Lengthen The Operating Life For A Diesel Engine Using Frequency Response Function (FRF) Measurement,” Sinergi, 2018, 161-168.
[17] C. W. De Silva, Vibration monitoring, testing, and instrumentation. 2007.
[18] H. C. Chen, W. C. Chen, Y. P. Liu, C. Y. Chen, and Y. T. Pan, “Whole-body vibration exposure experienced by motorcycle riders - An evaluation according to ISO 2631-1 and ISO 2631-5 standards,” Int. J. Ind. Ergon., vol. 39, no. 5, 2009, doi: 10.1016/j.ergon.2009.05.002.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 AN Surahman, Subekti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- Abstract 16
- PDF (Bahasa Indonesia) 8
