Analisis Frame Body Pada Mesin Pengupas Dan Pemotong Kentang Sederhana
DOI:
https://doi.org/10.56904/imejour.v2i2.62Keywords:
Frame body, Von Misses Stress, Displacement, Safety factor, Carbon steel S355Abstract
Pada industri pengolahan makanan, efisiensi dan kualitas mesin pemotong kentang menjadi faktor krusial dalam produktivitas. Penelitian ini bertujuan untuk menganalisis frame body pada mesin pengupas dan pemotong kentang sederhana menggunakan simulasi statis dan perhitungan teoritis. Analisis dilakukan menggunakan Software Autodesk Inventor dengan tiga jenis material: Carbon Steel S355, Stainless Steel 304, dan Aluminium 6061. Dengan beban 83,35 N, material Carbon Steel S355 menunjukkan performa terbaik dengan nilai von Mises stress maksimum 1,717 MPa, displacement 0,004826 mm, dan safety factor 15. Pada pembebanan maksimum 257,64 N, material ini tetap menunjukkan kestabilan dengan von Mises stress 3,505 MPa, displacement 0,009916 mm, dan safety factor 15. Hasil penelitian menyimpulkan bahwa Carbon Steel S355 merupakan material yang paling sesuai untuk frame body mesin ini karena memiliki nilai von Mises stress yang tidak melebihi yield strength dan faktor keamanan yang memadai.
References
[1] Mangguluang Z, Rahman F, Sahabuddin S, Pramana E. Rancang Bangun Pengupas Dan Pembersih Kulit Kentang Dalam Industri Rumah Tangga. ILTEK: Jurnal Teknologi. 2021 Oct 25;16(02):46-53.
[2] Saleh A, Muhammad DA. Analisis dan perancangan rangka mesin pemotong kentang otomatis. Jurnal TEDC. 2020 May 19;14(2):153-8.
[3] Perdana FS, Akbar A, Mahmudi H. Analisa Kekuatan Material Bahan dan Rangka Alat Pengguling Sapi Berbobot 1.2 Ton Menggunakan Software Autodesk Inventor. InProsiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi) 2022 Nov 22 (Vol. 6, No. 3, pp. 146-151).
[4] Wijayanto A, Akbar A, Nadliroh K. Analisa Kekuatan Rangka Dynotest Menggunakan Autodesk Inventor. InProsiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi) 2023 Jul 26 (Vol. 7, No. 3, pp. 1301-1308).
[5] Vitalii, Ivanov., Ivan, Pavlenko., Artem, Evtuhov., Justyna, Trojanowska. 1. Product Design. Springer tracts in mechanical engineering, (2023). doi: 10.1007/978-3-031-44641-2_2
[6] Belmiro, P.M., Duarte., A., M., F., Carvalho., Daniela, S., B., Lima., Diana, I., S., Costa., Inês, R., Nunes., João, Batista., Paulo, J., S., Gomes., Fernando, P., Bernardo. 3. Concept Development—From Academia to Industry: A Journey Motivated by the Design of Portable Thermal Slippers. Designs, (2022). doi: 10.3390/designs6040065
[7] Ambrose, Edward, Irudayaraj., V., Anbumalar. 4. The Conceptual Design of Mechanical Products. Periodico, (2022). doi: 10.37896/pd91.4/91424
[8] Congdong, Li., Run, Wu., Weiming, Yang. 5. Optimization and selection of the multi-objective conceptual design scheme for considering product assembly, manufacturing and cost. SN applied sciences, (2022). doi: 10.1007/s42452-022-04973-6.
[9] A., I., Chanyshev., I., M., Abdulin. Deformation and failure of originally isotropic media under the mises strength condition. Journal of Mining Science, (2006). doi: 10.1007/S10913-006-0061-4.
[10] A., Prasetiyo., Kartinasari, Ayuhikmatin, Sekarjati., Sutrisna. Numerical analysis of the influence iron type on Von Mises Stress and safety parameters for compost processing machine frame construction. IOP conference series, (2023). doi: 10.1088/1755-1315/1151/1/012058.
[11] Ahmet, N., Eraslan. On the Application of von Mises' Yield Criterion to a Class of Plane Strain Thermal Stress Problems. Turkish Journal of Engineering and Environmental Sciences, (2005).
[12] Suresh, Shrivastava., Chiradeep, Ghosh., John, J., Jonas. A comparison of the von Mises and Hencky equivalent strains for use in simple shear experiments. Philosophical Magazine, (2012). doi: 10.1080/14786435.2011.634848
[13] Seunghyun, Lee., Byoung-Il, Kim. Analytical Study on Characteristics of von Mises Yield Criterion under Plane Strain Condition. Journal of the Korea Academia Industrial Cooperation Society, (2015). doi: 10.5762/KAIS.2015.16.9.6391.
[14] Jerome, J., Connor., Susan, Faraji. The Displacement Method. (2013). doi: 10.1007/978-1-4614-3262-3_10.
[15] Amilton, Rodrigues, da, Silva., Fabiana, Paula, Drumond. Desenvolvimento de um software para análise estrutural de sistemas reticulados espaciais usando o método dos deslocamentos Development of a software application for structural analysis of spatial lattices using the displacement method. (2012).
[16] Haojie, Lian., Asger, Nyman, Christiansen., Daniel, A., Tortorelli., Ole, Sigmund., Niels, Aage. Combined shape and topology optimization for minimization of maximal von Mises stress. Structural and Multidisciplinary Optimization, (2017). doi: 10.1007/S00158-017-1656-X.
[17] Karel, Octavianus, Bachri., Arka, Dwinanda, Soewono., Alfi, Nabil. Analisis Kekuatan Purwarupa Swing Arm Untuk Sepeda Motor Listrik: Studi Kasus Pada PT “SC”. (2023). doi: 10.25170/cylinder.v9i2.4982.
[18] Denis, Alexandrovich, Chemezov., Svetlana, Ivanovna, Tyurina., Irina, Mikhailovna, Pavluhina., Oleg, Viktorovich, Gorbatenko., Irina, Alekseevna, Medvedeva. Calculation of von mises stress at plastic deformation of a steel bushing. Theoretical & Applied Science, (2018). doi: 10.15863/TAS.2018.09.65.35.
[19] Ing-Chang, Jong., Bruce, G., Rogers., William, Springer. Gc 2009-267: teaching von mises stress: from principal axes to nonprincipal axes. (2009).
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Integrated Mechanical Engineering Journal
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
